Further on 2.0.11 vs 1.6.3

[Lynnrod11]

One show, I can get 9/10 reception. The next minute I can get constant buffering. Normally during Live TV.
Sometimes changing channels helps, other times I must back out of the app and reload. Sometimes, works without VPN, as I must disconnect VPN to use most other services and I forget to reconnect. Other times, works better with VPN connect. Seems to really be dependent on which way I hold my tongue while selecting channel.

[Arthur]

@Lynnrod11 The app works fine with and without VPN, there were some problems with certain VPN providers at the beginning, while the 2.0.9- 2.0.11 versions were released. But that problem is resolved and now it works with all VPN, we recommend using Chicago or Washington DC server for best experience. And make sure you get a stable internet connection (minimum 75-80Mbps download speed, better if 100+ Mbps)

[Jack Thripper]

From the main site

[Hawk]

@Arthur
I test my FireTv speeds a lot and the average is around 75 mbps (with VPN on) and I might’ve topped out at 90+mbps a couple of times and that’s with Amazon’s best streamers. Have the TZBoxes averaged 100+ mbps? Does anyone have it yet here in the community?

[Jburge25]

The 2.x versions are certainly not running properly. We have reverted to 1.6 with no issues. Tons of problems loading tv shows under 2.x, with VPN, VPN Chicago, no VPN.

[CaboGuy]

@Hawk said:

Has it been working well on that 2.0.11 generally besides this instance?
Have you tried working with the Chat Support team?

@arthur said:
By following proper troubleshooting, the buffer issue can certainly be fixed. For that, you must follow the instructions correctly from our Support Team.

To be quite frank, I gave up on the support team a while back. Their apparently scripted answers don't change. "Clear your cache. If that doesn't work please reboot your Firestick and your router. If that doesn't work please uninstall and reinstall the MOA app."

Sorry, but I'm a retired Electronics & Network Engineer and probably know more about it all then they do. I went through that entire 30 minute scenario a couple of times with no discernable difference. As I've noted, I also keep another identical Firestick, configured identically and connected identically (but farther away) via wifi to the same router. That one, with 1.6.3 running, continues to be significantly more reliable and WAY less frustrating than the 2.0.11 app. It's not my router, it's not my Firestick, and uninstalling/reinstalling 2.0.11 over and over again has proven to be a waste of time. Not interested in doing it, but that's support's answer, every time.

[Hawk]

Understood. What I don’t understand is why some FSs are having buffering issues with MoaTV 2.0.11 and others like mine do not? Whats the reason to stay with 2.0.11 instead of going back to CatchOnTV 1.6.2 if there’s a lot of buffering consistency until the developers can optimize it for the FSs? I can tell that 2.0.11 is pushing my FS’s processors hard by the length of time it takes to load the OS up. Thats why I switched to my two FT Cubes after dealing with Kodi buffering with my FS’s and that eliminated that issue for me.

[Jack Thripper]

This attempts to explain different causes of/for buffering and actually does a good job of it.
https://channelmoa.com/what-is-iptv-buffering-and-how-to-fix-it.html

[Hawk]

@Jack-Thripper
This is excellent information. Thank you for sharing it!

[Jack Thripper]

@hawk
You are Welcome !
They should make that information a Sticky in the Troubleshooting section.

[Hawk]

@Jack-Thripper
Agreed. I think they can pin it to the top.

Update: I shared your post in the troubleshooting category Buffering Issues - How To Fix.

[Arthur]

Thank you all for your valuable feedback and for your participation in the discussion. Our team is continuously working to ensure a stable and customer-friendly service.